General Description The Tempcare is an electrically-powered, dry heat warmer which supplies external heat to the plastic tubing incorporated in IV tube sets. The IV set is placed in the ‘S’ shaped channel between the aluminum heating plates. The device is available in a 5mmØ (diameter 4.1~ 5.0) model accommodating most tube sizes used in veterinary applications. Operating temperature: 32 ºC - 41 ºC (89.6 ºF - 105.8 ºF) * Flow rate: 0~7ml / min. Safety Features: Heating plate temperature sensor, fluid temperature sensor, Heater sensor, Temperature fuse, splash resistant construc-tion, dry-heat Size/weight: 176 (L) x 65 (W) x 37 (H) mm / 560g (1.2lbs) * Effluent temperature is affected by initial fluid temperature, room temperature, flow rate and diameter of the tube set used.
	1) Automatic regulation The temperature of the warming plate adjusts according to the desired temperature of the effluent.   2) No disposables Special warming bags or coils are not required.     3) Less heat loss after warming Small size necessitates minimal tubing between the patient and the unit preventing cooling of the infused fluid.     4) Quick set-up The tube is inserted directly into the warmer; no priming or disposable preparation is required.         5) Rapid warm-up Ready to use in 2 ~ 3 minutes     6) Safe performance Protection from overheating, electric shock and contamination.         7) High durability Simple construction and shock resistant casing.